Why use site codes
GPS on phones can be weak indoors, in basements and between tall buildings. A site code lets people prove they are at the site by scanning it with their phone. Site codes are part of the Team plan and above.
Choose what a site accepts
Open Locations, choose the location and scroll to Site codes. Under Accepted when clocking in, tick one or more:
- GPS geofence: follows the location's rule (allow, warn or block). See Location checks and selfies.
- Rotating QR on a site screen: the strongest. The code changes every minute, so a photo of it stops working.
- Printed QR or NFC tag: weaker, because a photo of a tag works anywhere. These punches are marked “Site tag”.
A code that is accepted proves presence even when GPS is poor. If GPS disagrees, the punch is flagged for you to check.
A site screen with a rotating QR
- Under Site screens, press Add screen and name it, for example “Main gate tablet”.
- Open the link on a tablet or TV at the site. It is shown only once. The screen shows a full-screen QR, the site name and the time.
- Keep it plugged in. Last seen tells you if a screen has gone offline.
A screen code needs a connection to be checked. Remove a screen and its link stops working at once.
Printed tags and NFC stickers
- Under Printed tags, press Add tags, give a label (for example “Back door”) and how many.
- Press Print tags, or Write to NFC tag on a phone that supports it (NTAG213 or similar stickers).
- Stick the tag where people start work.
If a tag is lost or copied, remove it here: scans of it are then refused.
How workers scan
On their clock-in screen, workers press Scan site code and point the camera at the code. If the browser cannot scan, they open the phone's camera app instead: it opens the clock-in page with the code. They must have opened their personal clock-in link on that phone once first.
If something is wrong
- This site code has expired: scan the screen again and clock in within the seconds shown.
- The site code did not work, so your location was used: the punch is checked against the GPS rule instead and flagged.
- Someone photographed the screen? Change the code key: codes already shown stop working at once. Printed tags are not affected.
Checked against the product on 17 November 2026