کلاک اِن

Site QR codes, screens and NFC tags

Prove that people are at the site by scanning a code: a QR on a screen that changes every minute, or printed QR and NFC tags where there is no screen.

یہ مضمون انگریزی میں ہے۔ اس کا ابھی آپ کی زبان میں ترجمہ نہیں ہوا۔

Why use site codes

GPS on phones can be weak indoors, in basements and between tall buildings. A site code lets people prove they are at the site by scanning it with their phone. Site codes are part of the ٹیم plan and above.

Choose what a site accepts

Open Locations, choose the location and scroll to Site codes. Under Accepted when clocking in, tick one or more:

  • GPS geofence: follows the location's rule (allow, warn or block). See Location checks and selfies.
  • Rotating QR on a site screen: the strongest. The code changes every minute, so a photo of it stops working.
  • Printed QR or NFC tag: weaker, because a photo of a tag works anywhere. These punches are marked “Site tag”.

A code that is accepted proves presence even when GPS is poor. If GPS disagrees, the punch is flagged for you to check.

A site screen with a rotating QR

  1. Under Site screens, press Add screen and name it, for example “Main gate tablet”.
  2. Open the link on a tablet or TV at the site. It is shown only once. The screen shows a full-screen QR, the site name and the time.
  3. Keep it plugged in. Last seen tells you if a screen has gone offline.

A screen code needs a connection to be checked. Remove a screen and its link stops working at once.

Printed tags and NFC stickers

  1. Under Printed tags, press Add tags, give a label (for example “Back door”) and how many.
  2. Press Print tags, or Write to NFC tag on a phone that supports it (NTAG213 or similar stickers).
  3. Stick the tag where people start work.

If a tag is lost or copied, remove it here: scans of it are then refused.

How workers scan

On their clock-in screen, workers press Scan site code and point the camera at the code. If the browser cannot scan, they open the phone's camera app instead: it opens the clock-in page with the code. They must have opened their personal clock-in link on that phone once first.

If something is wrong

  • This site code has expired: scan the screen again and clock in within the seconds shown.
  • The site code did not work, so your location was used: the punch is checked against the GPS rule instead and flagged.
  • Someone photographed the screen? Change the code key: codes already shown stop working at once. Printed tags are not affected.

17 نومبر، 2026 کو پروڈکٹ سے ملا کر جانچا گیا

کیا یہ مضمون مددگار تھا؟

اب بھی مشکل ہے؟

ہمیں لکھیں اور بتائیں کہ آپ کس اسکرین پر ہیں اور کیا ہونے کی توقع تھی۔

ہماری رابطے کی معلومات دیکھیں

کیا آپ ایسی کمپنی میں کام کرتے ہیں جو TopTimesheets استعمال کرتی ہے؟ آپ کے مینیجر آپ کے اوقات اور کلاک اِن لنک ٹھیک کر سکتے ہیں۔

Part of the MeWeBe network · Backed on MeWeBe