Solución de problemas

Troubleshooting: location, offline punches, time zones and links

Answers to the questions we hear most: location not found, outside the site, punches made offline, hours on the wrong day, links that stop working and the camera.

Este artículo está en inglés. Todavía no se ha traducido a tu idioma.

Location

“We couldn't get your location”

The phone did not share its location with the browser.

  1. Turn on location in the phone settings, and allow it for the browser (Chrome, Safari…).
  2. When the browser asks, choose Allow. If you said no before, open the site settings in the browser (the lock or the “aA” next to the address) and allow location.
  3. Step outside or near a window, wait a few seconds and press Clock in again.

If the site blocks clock-ins without a location, ask your manager to add the time, or use a site QR code if the site has one.

“Outside the site — 250 m away”

Your phone says you are outside the site's fence. Move closer and try again. Weak GPS indoors is taken into account, but not without limit. Managers: widen the radius or draw the site's real area under Locations, or switch the site to Allow and flag for review. Clocking out is always allowed.

The location is right but the punch is flagged “Outside site”

The site's fence may be in the wrong place. Open Locations, check the pin on the map and the radius, and save. Older punches keep their flag; you can approve them as usual.

Offline punches

The phone had no connection. Is the punch lost?

No. The clock-in screen saves the punch on the phone with the real time (“Saved offline — will sync”) and sends it as soon as the phone is back online. It is marked Offline punch for the manager. Kiosks work the same way and check the PIN when they reconnect.

“This punch is too old to record”

Offline punches are accepted for up to 7 days. After that, ask your manager to add the time on Timesheets.

“Device time off”

The phone's clock was ahead of the real time. Set the phone to set the time automatically. The manager sees the flag and can correct the punch.

Time zones

Hours show on the wrong day, or start an hour off

Days and weeks are counted in the company's time zone, and each location keeps its own zone.

  1. Check Settings → Company → Time zone and Week starts on.
  2. Check the time zone of each site under Locations.
  3. Choose Apply rule changes from to set the first day the new zone counts.

Existing clock-ins keep the exact time and zone they were recorded in: a new zone only changes how days and weeks are counted from that date. Locked pay periods never change.

A newer link has replaced it. Ask your manager to send you a new one (on the person's page: New link). Kiosk and site screen links are shown only once: an admin creates a new kiosk or screen.

The camera does not open for the selfie

Allow the camera for the browser in the phone settings. If the preview still does not start, press Open camera to use the phone's own camera app.

“Too many wrong PINs”

On a kiosk, wait 15 minutes and try again, or ask your manager to set a new PIN on your profile.

Still stuck?

Use the contact options below, and tell us which screen you are on and what you expected to happen.

Revisado con el producto el 17 de noviembre de 2026

¿Te ha sido útil este artículo?

¿Sigues con dudas?

Escríbenos y dinos en qué pantalla estás y qué esperabas que pasara.

Ver nuestros datos de contacto

¿Trabajas en una empresa que usa TopTimesheets? Tu responsable puede corregir tus horas y tu enlace para fichar.

Part of the MeWeBe network · Backed on MeWeBe